System information

ATS 2000/3000/4000/4500 Programming manual 105
Output 3 Timezone 12
Timezone No:
Output 3 Inactive During Timezone
*-Change
Output 3 is NON-Inverted
*-Change
Output 15 (Internal Siren output) is linked to Event Flag 13.
Output 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208 224, 240 (DGP Siren
O/P's) are linked to Event Flag 1.
 For more information on event flags, see Event Flags on page 151.
16.1.2. Timezone to control output
The timezone entered controls the times that an output is active or inactive. If a timezone
is programmed, it sets the output when the time is valid. The status of the event flag is
irrelevant when the timezone is valid. If the timezone is invalid, the output follows the
event flag. If no timezone is programmed the output follows only the event flag.
 See also Timezones on page 95.
16.1.3. Active or inactive during timezone
Determine the effect if the timezone is valid.
Active If set to Activate during timezone, the output activates when the
timezone is valid regardless of the status of the event flag and
provided the output is not inverted.
Inactive If set to Inactive during timezone, the output does not activate
when the timezone is valid regardless of the status of the event
flag and provided the output is not inverted. If the timezone is
invalid, the output follows the event flag.
16.1.4. Invert output
Inverted If the output is inverted, the logic controlling the output is
reversed. e.g. If the previous logic determines that the output is
to be ON, this setting would change it to OFF.
NON-Inverted The output follows the event flag. If the event flag is active, the
output is ON.