Programming instructions
9
ALARM LOCK SYSTEMS, INC
VERSION DL26 org REC
04/07/98 13:11:28 Tue
Clock adjust setting +0
Cycle count hex 00000E
F39 day ct hex 00
Print the Lock’s Time, Date and Day programming to
ensure the clock is set correctly. Refer to Printer
Functions (page 18) for proper Printer-Lock positioning.
From Program Mode enter the following command:
; 5 7 :
Optional
User Programming
Add a Basic User Code
Program a User Code of 987. Use Function 2, and add the new user
as User 12 (Users 12-50 are Basic Users). Refer to Function 2 (page
11).
; 2 ; 1 2 ; 9
8 7 :
Add another Basic User Code
Program a User Code of 246. Use Function 2, and add the new user as User 13.
Refer to Function 2 (page 11).
; 2 ; 1 3 ; 2
4 6 :
Exit Program Mode
User code conflicts
Care should be taken not to
program a new user code which
matches the first digits of any other
user code. (only the code with the
least number of digits would be
recognized). Example: If user
codes 123 and 123456 are both
entered in the system only code
123 would be recognized.
To program user codes that match
the first digits of other codes, see
program Function 69.
An error will sound if you try to
program a new user code which
matches the first digits of the
Master User Code (User Number
04/07/98 13:06:35 Tue
USER
ENABLED ?
|
USER|USER | |GROUP|PROG
NUM |CODE | | |SETS
1 123456 E .... 1234
12 987 E .... ....
13 246 E .... ....
Print the Lock’s User Code List. Refer to Printer
Functions (page 18) for proper Printer-Lock positioning.
From Program Mode enter the following command:
; 5 6 :
User Number (12) User 12’s Code
User Number (13) User 13’s Code
------- AUDIT LOG -------
04/07/98 13:06:35 Tue
13:01:59 001 PROGRAM 56
13:01:29 001 PROGRAM 57
13:00:53 001 ENTRY
13:00:26 013 ENTRY
13:00:03 012 ENTRY
12:56:27 001 PROGRAM 2
12:56:27 001 PROGRAM 40
12:56:04 001 PROGRAM 39
12:55:00 NEW CLCK TIME
12:01:39 OLD CLCK TIME
12:01:30 001 PROGRAM 38
12:01:30 DATE CHANGED
12:01:07 001 ENTRY
12:00:48 CLK TEST:PASS
12:00:45 RAM TEST:PASS
12:00:45 POWER UP
-------------------------
End of Audit Log
Print the Lock’s Audit Trail. Refer to Printer
Functions (page 18) for proper Printer-Lock positioning.
From Program Mode enter the following command:
; 5 5 :