Programming instructions

Battery Installation

Remove the back cover and install batteries as shown. The lock

will beep 3 times. To load the default program press any key

within 5 seconds, the lock will beep slowly while the default

values are loaded and beep rapidly upon completion.

Entering Program Mode

1. Enter Master Code 1 2 3 4 5 6

Default Master Code

2. Enter ;

Program a new Master Code.

; 1 ; [ _ _ _ _ _ _ ] ; [ _ _ _ _ _ _ ] :

New Master Code Confirm New Master Code

Setting the Clock - While still in Program Mode enter the following commands to set the clock.

Program the Date.

; 3 8 ; [ _ _ _ _ _ _ ] :

Date

Program the Time.

; 3 9 ; [ _ _ _ _ ] :

Time

Program the Day of the Week.

; 4 0 ; [ _ ] :

Day

For Example: To set time to 8:25 P.M.;

Enter: ; 3 9 ; 2 0 2 5 :

For Example: To set time to 8:25 A.M.;

Enter: ; 3 9 ; 0 8 2 5:

For Example: March. 8, 1998;

Enter:

; 3 8 ; 0 3 0 8 9 8 :

For day enter: 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday,

5 for Thursday, 6 for Friday and 7 for Saturday.

Program Mode

The keypad sounder will beep every 6 seconds

and the keypad LED will flash green every 6

seconds while in program mode when no keys

are pressed. NOTE: There is a 3 minute

Timeout if no keys are pressed while in

Program Mode.