Programming instructions

; 6 9 :

69. Enable : as Enter Key

• When this function is enabled the user must press the : key after a user code entry,

this allows user codes which are subsets of other user codes.

Example:

1 2 3 : is a valid user code;

1 2 3 4 : is a valid user code

Enter Key Enable/Disable (Allows Programming of Codes that Match the 1st digits of other Codes)

; 7 0 :

70. Disable : as Enter Key

ENTER KEY

72. Schedule Enable Passage

Mode (Unlock)

; 7 2 ; [ _ ] ; [ _ _ _ _ ] :

(Day) (Time)

Use the functions below to Enable/Disable Schedule Passage Mode.

For day enter: 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for

Thursday, 6 for Friday and 7 for Saturday, 8 for Monday to Friday, 9 for Saturday and

Sunday, 0 for all days of week.

Scheduled Passage Mode Enable/Disable

73. Schedule Disable Passage

Mode (Lock)

; 7 3 ; [ _ ] ; [ _ _ _ _ ] :

(Day) (Time)

SCHEDULES

; 6 7 ; [ _ ] :

(Relay Function)

67. Add Relay Function

; 6 8 ; 0 0 0 :

68. Delete All Relay Functions

• Relay function must be 1-11

Program 1 or more functions below to activate the Relay for 2 seconds when the following

event occur:

1. Remote Input while enabled 6. Function 90 Activated 11. Any key press

2. Remote Input while disabled 7. Locked by Schedule

3. Failed Entry attempt 8. Unlocked by Schedule

4. Disabled user entered code 9. Keypad Lock Out

Delete all Relay Functions programmed by Function 67.

RELAY

71. Reserved