Programming instructions

49. Disable Passage Mode

50. Return Lock to Normal

Passage Mode Schedule

(The DL3000 will lock or unlock

depending on the current schedule)

48. Enable Passage Mode

; 5 1 :

51. Set Pass Time to 5 Sec.

; 5 2 :

; 5 3 :

• Allows passage through the door without the need for a code using Function 48. Re-Lock

using Function 49.

• Programmed Schedules will not override the state of the lock using functions 48 and 49.

If it is required that programmed schedules do override passage mode, Enable/Disable

Passage mode using Functions 45/46. Use Function 50 to return the lock to scheduled

functions.

Passage Mode Enable/Disable - Schedule will not Override

Use the functions below to change the pass time to 5, 10 or 15 seconds. The Pass Time is

defaulted to 5 seconds. The Pass Time is the time the lock stays unlocked after a User

Code is entered.

Pass Time

52. Set Pass Time to 10 Sec.

53. Set Pass Time to 15 Sec.

PASSAGE MODE

; 4 9 :

; 4 8 :

; 5 0 :

54. Reserved

PASS TIME

See Scheduled functions 72 and 73 for scheduled passage mode.

NOTE: