Programming instructions

USERS

; 6 :

6. Enable Total User Lockout

7. Disable Total User Lockout

; 7 :

8. Change User Program Level Ability

; 8 ; [ _ _ _ ] ; [ _ _ _ _ ] :

(User Number) (Program Levels)

; 1 0 ; 0 0 0 :

10. Erase All Users Except the Master Code

User Lockout Mode

Enables/Disables all User Codes (Except User 1 Code) from operating the lock. Note: No

other programming functions or schedules will re-enable users. Users must be re-enabled

with function 7.

Service Code is a One-Time-Only Code. Once it is used, it is disabled until enabled again.

; 9 :

9. Enable User 300 (Service Code)

• User Number must be between 2 and 300.

The ability to program one or more program levels may be selected.

Example 1: Allow User 67 to program levels 1, 2 and 4;

Enter:

; 8 ; 6 7 ; 1 2 4 :

NOTE: User 67 does not have access to Programming Functions with a Program Level

Ability of 3.

Example 2: Prevent User 67 from programming any programming levels;

Enter:

; 8 ; 6 7 :

NOTE: Having a Program Level Ability of 4 does not allow access to functions requiring a

Program Level Ability of 3, 2 or 1. If multiple levels are required, program for each level

that is required.

Erases all user codes except the Master Code (User 1).

5. User Enable with Timeout

(Enter Timeout, XXX Hours)

; 5 ; [ _ _ _ ] ; [ _ _ _ ] :

(User Number) (XXX Hours)

• User Numbers must be between 2-300.

• Hours must be between 1 - 999

11. Reserved