User`s manual

C2000 User Manual
Page 16 of 28
When the Concept 2000 needs to display more than one screen of information, the second line of the display window
is scrolled. The scrolling may always be controlled by, pressing the LEFT arrow to re-start scrolling, or the RIGHT
arrow to scroll letter by letter. Holding the RIGHT arrow pressed will speed up the scrolling.
This option allows the default scrolling rate to alter depending on the current User operating the system. Scrolling
speed may be set between 1 and 8 characters a second. A good average to choose is 5 to 7 chars/sec.
6.1 User 999 - The Master User
User 999 is the most powerful User in the system. He/she can perform any panel operation except Concept 2000
programming. The secret code of User 000 is the single most important code in the system and must be treated as if it
were the combination to a vault.
DO NOT LOSE OR FORGET THE MASTER CODE.
6.2 USER 001 - THE INSTALLER
Programming of the Concept 2000 can only be performed by User 001. User 001 is normally assigned to the Installing
Company. User 000 cannot alter User 001 code options. Like-wise, User 001 cannot any other User code options
although can access Programming options ect.
6.3 DIS-ABLE USER 001
After the completion of the Concept 2000 installation, setting this option to ā€œYā€ prevents the Installer from accessing
system both locally and via the telephone line, (except if the system is monitored). If User 001 ( normally the Installer
) wishes to alter your system, he/she must first ask the Master User to set the above option to ā€œNā€.