Operating instructions

4.2 Other Manager Menu Functions
ENGINEER MENU Not accessible by the user
SET DATE AND Simply set the date and time using the YES, NO
TIME and numeric keys - for example at clock changes.
LOG REVIEW Using the YES and NO keys, select the log of
your choice to review past system events.
Activation Log Scroll events forward using 'A' or '#' key and
Alarm Log and backward using 'C' key
Trouble Log
PRINT LOGS IF A PRINTER IS FITTED TO THE SYSTEM,
selecting this option (with YES) will enable the
logs to be printed out to preserve a record of past
system events. The individual logs are selected in
the same way as to view.
WALK TEST This allows you to test the system to check that
all detectors are working correctly, without
setting the system or creating an alarm.
BELL TEST Pressing the YES key will turn the bell and strobe
on. Press NO to cancel.
OMIT ZONES Enables a 24 Hr Monitoring circuit to be omitted
to prevent alarms being generated in 'day' mode.
See 4.3 for details.
4.3 Omitting Zones
To omit a 24Hr Monitoring circuit (eg 24 Hr Tamper, PA or Fire zone) whilst the system is
unset, select this option. During the selection process, a rapid pulsing tone will be generated.
OMITTED _ _
Key in the number of the first zone required, and this will then show
OMITTED _ _
Fire Door 2
Additional zone numbers may be entered, and will scroll sequentially so that all zones to be
omitted indicate. If a zone number is entered for the second time, it will disappear from the
omitted list.
Press YES on completion.
If a zone thus programmed is opened, the display will show
24Hr Zone Open
Please Check but no alarm will be generated
To restore zones to normal operation, enter the 'OMIT ZONES' option again.
If the zones are not readmitted beforehand, this will be done, automatically, on setting the
system.
4.4 Exit Manager Mode
Press 'YES' to return to 'System Ready'. Display will briefly show 'UPDATING NV
MEMORY' before displaying 'System Ready.'
A 'quick exit' facility is also available, without updating the NV memory, by pressing
the 'A' key whilst any main menu item is displayed. This will NOT function after
changing codes.
Castle Care-Tech Ltd.
Page 12 Iss: 12