User Manual

7. Operation
The power module will be put into operation by providing the supply voltage to it. It provides the 5 V supply voltage to
the RF reader modules and has all necessary pins for operating the RF reader modules available on its pins 10 to 19.
8. Care, Maintenance and Disposal
Besides providing the specified voltage and its intended use as a power module for the RF reader modules 1plus, 2plus
and 4plus the power module does not require any special care or maintenance.
A power module that highly unexpected has become unusable must be disposed of observing all relevant legal regula-
tions.
9. Debugging
If all notes and regulations of this and other relevant Operation Manuals are observed correctly there should be no
unexpected malfunctions. If this nevertheless happens to be the case, please do not attempt to make any own repairs.
Return the device to your point of purchase and have it checked and possibly repaired by a qualified engineer. Open-
ing or improper handling of the devices will invalidate any guarantee.
10. Technical Specifications
Operating voltage : 12V DC
9V AC
Output voltage : 5V DC, stabilized
Supply current : max. 200 mA
Relay switching power : 3A / 30VDC, 3A / 125VAC
Measurements (LxBxT) : 45 x 35 x 15 mm
Operating temperature : 0°C bis 45°C
11. Notes on Manufacturer
CODATEX Hainzlmaier KEG
Ischlerbahnstraße 15
A – 5020 Salzburg
Email: [e-mail]
Internet:
http://www.codatex.com
5