User Manual

11. Care, Maintenance and Disposal

Besides providing the specified voltage and its intended use as a device for acquisition, storage and

interpretation of Transponder Data the Standalone Reader does not require any special care or maintenance.

An RF Reader that highly unexpected has become unusable must be disposed of observing all relevant legal

regulations.

12. Debugging

If all notes and regulations of this and other relevant Operation Manuals (Online Help, etc.) are observed

correctly there should be no unexpected malfunctions. If this nevertheless happens to be the case, please do

not attempt to make any own repairs. Return the device to your point of purchase and have it checked and

possibly repaired by a qualified engineer. Opening or improper handling of the devices will invalidate any

guarantee.

13. Technical Specifications

Operation Voltage: 5V ±5%, stabilized,

ripple <50mV

Power consumption: max. 200 mA

Transmitter frequency: 125 kHz

open collector output current: max. 100mA (sink),

max. 300mW

Max. Reading Distance: app. 7 cm

Max. Distance Antenna / Electronics: 1.5 m

Max. Number of Transpondersl: 50 key transponder

Measurements Casing (L x W x T): 45 x 35 x 10 mm

Operating Temperature: 0°C bis 45°C

14. Notes on Manufacturer

CODATEX Hainzlmaier KEG

Ischlerbahnstraße 15

A – 5020 Salzburg

Email: info@codatex.com

Internet:

http://www.codatex.com

We herewith declare, that this RF reader is in accordance with the basic specifications and other relevant

regulations of the directive 1999/5/EG.

The original declarations of conformity (Nr.: G0M20208-7058-C) can be found on our homepage under