User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
NGT ASR Transceiver Getting Started Guide 71
CODAN
Appendix D—Creating an entry
in a list
To create an entry in a list:
1 Select the list in which you want to create an entry.
1 Hold the key to open the List Manager.
1 Select Create entry.
The transceiver suggests a name for the new entry based
on the name of the entry you were on.
1 Enter the name that you want to use for the new entry.
The name must be unique to the list that you are in.
1 Press the key.
The transceiver will prompt you to enter settings for the
entry.
The new entry is created and the List Manager remains
open.
NOTE
This process does not apply to entries in the
Control List.
NOTE
For help with entering text see page 61,
Entering and editing text.
NOTE
For information on settings for your
particular list see the reference material on
the enclosed CD.