User's Manual

Getting started
NGT ASR Transceiver Getting Started Guide 51
Making a Phone call from the Address List
This section shows you how to make a Phone call from the
Address List. It assumes that you have created an entry in the
list to do this (for help see page 71, Creating an entry in a list
and the reference material on the enclosed CD).
To make a Phone call from the Address List:
1 Go to the entry you want to call in the Address List.
1 Press the key.
1 If you are prompted for details about the call, use the
information in the following table to enter them, then
press the key.
NOTE
Scroll to the entry or use the Find feature
(for help see page 67, Finding words and
values).
If this prompt is
displayed...
Do this...
Select link • select the phone link station through which you want to
make the call
Phone link addr? • enter the address of the phone link station through which
you want to make the call (including any special ALE
address syntax for ALL, ANY, Group Selective, NET and
Wildcard calls)
Select network • select the network in which you want to make the call
My address? • select or enter the self address from which you want to send
the call