User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
Getting started
50 NGT ASR Transceiver Getting Started Guide
1 Wait until a message informs you that the call has been
successful (this means your call has been automatically
answered by the other station).
1 Hold down the PTT button then speak.
Release the PTT button when you have finished
speaking.
1 To end the call, press the key.
If the transceiver was scanning prior to the call it
resumes scanning.
NOTE
To abort the call before a connection to the
other station is made, press the PTT button.
NOTE
If you made the call using a special ALE
address syntax, you will be able to send
data within the established link by pressing
the key and following the prompts.