User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
Getting started
48 NGT ASR Transceiver Getting Started Guide
Selecting the best channel in an ALE/CALM
network
In order to select the best channel based on LQA information
stored in the transceiver, you need to provide the context of the
best channel, i.e. the address that you want to call and the
network in which you want to make the call.
To select the best channel:
1 Press the key to switch off scanning.
1 Press the key.
1 Type the address of the station(s) for which you want to
find the best channel.
1 Select any valid call type for the address entered.
1 Select the ALE/CALM network in which you want to
make the call.
1 At the channel/mode prompt, press the key.
The best channel is selected.