User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
Getting started
NGT ASR Transceiver Getting Started Guide 47
Making a manual sounding operation in an
ALE/CALM network
If you need to perform a manual sounding operation using the
handset, you make a Channel Test call in an ALE/CALM
network using the text SOUNDING as the address. You can do
this as part of a new call, or if you use this feature often, set up
an entry in the Address List, then use this entry to perform a
sounding operation in the selected network (see page 204,
Creating an entry in the Address List). The sounding operation
will update the LQA database in transceivers that detect the
sounding.
To make a manual sounding operation:
1 Press the key.
1 Select Channel Test as the call type, then press the
key to enter the text SOUNDING as the address,
then press the key.
1 Select the ALE/CALM network in which you want to
make the sounding, and if scanning was switched off, the
channel/mode on which you want to make the sounding.
A sounding operation on all channels, or the specified
channel, in the network is performed.
EASI
*
TALK