User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
Getting started
NGT ASR Transceiver Getting Started Guide 41
Enter up to 15 upper-case letters or numbers, or a
combination of both. ALE addresses are sent in groups of
3 characters. You should use addresses with a length that
is a multiple of 3, but preferably just 3 characters.
1 Press the key.
1 Select the network in which you want to use this self
address.
To use the self address in all networks, select <all>.
The self address is created and the List Manager remains
open.
1 If you want to view the self address you have created,
close the List Manager by pressing the key.
1 Press the key repeatedly until you return to the Main
Menu.