User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
Getting started
40 NGT ASR Transceiver Getting Started Guide
Entering your station self address
To enter your station self address:
1 Go to the Address entry in the Control List.
1 Select the entry.
If a self address has not yet been entered the screen
displays (none). Press the key to open the List
Manager.
If one or more self addresses have already been entered
the screen displays the number of addresses (e.g.
1 items). Press the key to display the self addresses,
then hold the key to open the List Manager.
1 Select Add item.
1 Enter the self address of your station. For example:
NOTE
For help with entering text see page 61,
Entering and editing text.