User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGTtransceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Switching on the transceiver
- Changing the screen contrast
- Changing the screen brightness
- Using the keys on the handset
- Accessing the Main Menu
- Switching scanning on or off
- Switching mute on or off
- Entering your station self address
- Listen Before Transmit Mode
- Replacing LQA information for all channels in an ALE/CALM network
- Making a manual sounding operation in an ALE/CALM network
- Selecting the best channel in an ALE/CALM network
- Making a Selective call from the Address List
- Making a Phone call from the Address List
- Making an emergency call using the emergency key
- Using a special ALE address syntax to make a call
- Appendix A— Standard hot keys
- Appendix B— Entering and editing text
- Appendix C— Finding words and values
- Appendix D— Creating an entry in a list
- Appendix E— HF radio transmission
- Appendix F— Definitions
- Index
Getting started
NGT ASR Transceiver Getting Started Guide 39
Switching mute on or off
To switch mute on or off:
1 Press the key.
A message is displayed briefly to inform you that mute
has been switched on or off.
When the channel screen is displayed the mute status is
indicated by a V or S at the top centre of the screen. If the
letter is highlighted, mute is on. If the letter is not
highlighted, mute is off.
Setting the mute type
To select the mute type:
1 Press the key to toggle the mute type between
Voice mute (V) and Selcall mute (S).
7
PRS
SV