User's Manual

Table Of Contents
NGT transceiver compliance
NGT ASR Transceiver Getting Started Guide 5
European Radio and Telecommunications
Terminal Equipment Directive
The NGT transceiver product range has been tested and
complies with the following standards and requirements
(articles of the R&TTE Directive):
Article 3.1b: ETSI EN 301 489-1
Article 3.1b: ETSI EN 301 489-15
Article 3.2: Australian type approval according to
AZ/NZS 4770:2000 and ECR 209
Article 3.1a: Assessed against ICNIRP and FCC
requirements
Article 3.1a: EN 60950
Compliance with these standards is deemed sufficient to fulfil
the requirements of the Radio and Telecommunications
Terminal Equipment Directive 1999/5/EC.
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of Conformity and Expert Letter of
Opinion
The CE Declarations of Conformity and Expert Letter of
Opinion for each specific product are listed on page 89,
Associated documents. These documents can be made
available upon request to Codan or a Codan-authorised
supplier.
0191 0191