User's Manual

Table Of Contents
Entering and editing text
NGT SRx Transceiver Getting Started Guide 41
Changing between alpha and numerical characters
To change between upper-case and lower-case letters and
numbers in an editable screen:
1 Press # to change the character/case indicator at the
bottom right of the screen from A (upper-case) to a
(lower-case) to # (numbers).
Moving the cursor
To move the cursor across the text:
1 Use and to move the cursor left and right
respectively.
Inserting text
To insert text:
1 Use and to move the cursor to the point where you
want to insert text (or a space), then press the required
character key.
NOTE
When you are prompted to enter a call
address, the characters that you can enter
are determined by the call systems installed
in the transceiver.
NOTE
If you want to insert a space, make sure
that A or a is displayed at the bottom right
of the screen before you press 0 otherwise
you will enter a zero.
NOTE
You can enter a special character using
*
,
or with and .