User's Manual

Installation
18 NGT SRx Transceiver Getting Started Guide
Cables
Mounting an NGT SRx fixed station
An NGT SRx fixed station may be mounted using a desk
console (Codan part number 15-00766). For general guidance
on suitable locations for equipment and installing the fixed
station see the reference material on the enclosed CD.
Desk console
The pre-assembled desk console combines a goose-neck
microphone, an in-built speaker, and a headphone jack (see
Figure 2 on page 17). The handset connects to the rear of the
console. The console cradles the handset.
RF unit and transceiver supply
The RF unit and the transceiver supply are self-contained and
are usually stacked loosely. If you want to mount the RF unit
and/or the transceiver supply, contact your Codan
representative to obtain a rack-mounting unit or the
appropriate mounting cradles.
Table 3: Cables for a typical NGT SRx fixed station
Cable Symbol Part number
Handset and speaker connector cable for SRx 08-06022-001
Cable between RF unit and optional Code 766 Desk
Console
08-06332-001
Coaxial cable between RF unit and antenna
a
a. The part number for this cable corresponds to a 30 m coaxial cable. The cable is also available
in a number of shorter lengths.
08-05103-030