User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGT transceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Appendix A- Entering and editing text
- Appendix B- Using Quick Start
- Appendix C- Transceiver specifications
- Appendix D- HF radio transmission
- Appendix E- Definitions
- Index
Installation
12 NGT SRx Transceiver Getting Started Guide
Cables
Mounting an NGT SRx mobile station
Most components of an NGT SRx mobile station are provided
with their own mounting cradles. For general guidance on
suitable locations for equipment and installing these stations
see the reference material on the enclosed CD.
Mounting the handset cradle
To mount the handset cradle:
1 Mount the handset according to the fitting instructions
(Codan part number 15-00129-001) provided with the
handset cradle.
Mounting the speaker
To mount the speaker:
1 Secure the mounting cradle to the surface with at least
two screws.
Ensure there is sufficient space at the rear for the cable.
1 Attach the speaker to the cradle with the two screws and
rubber washers.
Table 2: Cables for a typical NGT SRx mobile station
Cable Symbol Part number
Handset and speaker connector cable for SRx 08-06022-001
Coaxial cable between RF unit and antenna 08-05103-006
Control cable between RF unit and antenna 08-05627-006
DC power supply cable 08-03255