User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 NGT transceiver compliance
- 2 Installation
- 3 The handset
- 4 Getting started
- Appendix A- Entering and editing text
- Appendix B- Using Quick Start
- Appendix C- Transceiver specifications
- Appendix D- HF radio transmission
- Appendix E- Definitions
- Index
NGT transceiver compliance
8NGT SRx Transceiver Getting Started Guide
Earth symbols
Chassis earth connection points are provided on the
NGT transceiver and 3020 Transceiver Supply. A protective
earth is provided in the AC mains wiring of the 3020
Transceiver Supply. This protective earth needs to be
connected at the AC mains supply outlet. The symbols shown
in Table 1 are used to identify the earths on the equipment.
C-tick approval
The NGT SRx Transceiver meets the requirements of the
Australian Communications Authority Radiocommunications
(MF and HF Radiotelephone equipment—Land Mobile
Services) Standard 2003 (AS/NZS 4770).
WARNING
A protective earth connection must be
included in the mains wiring to the 3020
Transceiver Supply (see below, Earth
symbols).
The protective cover must always be fitted
when the 3020 Transceiver Supply is
connected to the AC mains.
Table 1: Earth symbols
Symbol Meaning
Chassis earth
Protective earth