User's Manual

NGT transceiver compliance
NGT SRx Transceiver Getting Started Guide 7
Electromagnetic compatibility
To ensure compliance with the EMC Directive is maintained,
you must:
1 Use standard shielded cables supplied from Codan
(where applicable).
1 Ensure the covers for the equipment are fitted correctly.
1 Cover unused connectors on the RF unit with the
protective caps supplied to prevent electrostatic
discharge passing through your transceiver.
Electrical safety
To ensure compliance with the European Low Voltage
Directive is maintained, you must install and use the
NGT transceiver in accordance with the instructions in the
NGT SRx Transceiver Getting Started Guide and the NGT SRx
Transceiver Reference Manual.
When using equipment that is connected directly to the AC
mains these precautions must be followed and checked before
applying AC power to the unit:
1 Use the standard AC mains cable supplied.
1 Ensure the covers for the equipment are fitted correctly.
CAUTION
If it is necessary to remove the covers at
any stage, they must be refitted correctly
before using the equipment.
CAUTION
If it is necessary for a qualified electronics
technician to remove the covers during
servicing, they must be refitted correctly
before using the equipment.