User's Manual

NGT transceiver compliance
NGT SRx Transceiver Getting Started Guide 5
European Radio and Telecommunications
Terminal Equipment Directive
The NGT transceiver has been tested and complies with the
following standards and requirements (articles of the R&TTE
Directive):
• Article 3.1b: ETSI EN 301 489-1
• Article 3.1b: ETSI EN 301 489-15
• Article 3.2: Australian type approval according to
AZ/NZS 4770:2003
• Article 3.1a: assessed against ICNIRP requirements
• Article 3.1a: EN 60950
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of Conformity and Expert Letter of
Opinion
The CE Declaration of Conformity and Expert Letter of
Opinion for this product is listed on page 65, Associated
documents. This document can be made available upon
request to Codan or a Codan-authorised supplier.
Protection of the radio spectrum
CAUTION
Most countries restrict the use of HF radio
communications equipment to certain frequency
bands and/or require such equipment to be
licensed. It is the user’s responsibility to check
the specific requirements with the appropriate
communications authorities. If necessary,
contact Codan for more information.
0191 0191