User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 Overview
- 2 Installing the 3160
- Disclaimer
- What you need to consider
- Installing the 3160 in a basic layout
- Installing the 3160 in a stacked layout
- Attaching the 2110 amplifier adaptor panel to the rear of the transceiver cradle
- Attaching the 3160, voltage regulator and external speaker to a mounting surface
- Attaching a suitable power supply to the power supply cover
- Attaching the power amplifier mounting bracket to the transceiver cradle
- Attaching the 3160 and external speaker to the power amplifier mounting bracket
- Connecting the equipment
- Setting up the transceiver
- Grounding the 3160
- Installing the station
- 3 Specifications
- 4 Accessories
- Appendix A- Connectors
- Appendix B- Compliance
- Appendix C- Definitions
- Index
Compliance
46 Power Amplifier 3160 Installation Handbook
Introduction
This section describes how to ensure the 3160 Power
Amplifier complies with the European EMC Directive 89/336/
EEC and the European Low Voltage Directive 73/23/EEC as
called up in the European R&TTE Directive 1999/5/EC.
This section also contains the requirements for FCC
compliance.
European R&TTE Directive
The 3160 Power Amplifier has been tested and complies with
the following standards and requirements (articles of the
R&TTE Directive):
• Article 3.1b: ETSI EN301489-1 V1.4.1
• Article 3.1b: ETSI EN301489-15 V1.2.1
• Article 3.1a: EN60950-1
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , , or
markings on the model label of the product.
Declaration of Conformity
The CE Declaration of Conformity for the product is listed on
page 60, Associated documents. This document can be made
available upon request to Codan or a Codan-authorised
supplier.
0191
0191