User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 Overview
- 2 Installing the 3160
- Disclaimer
- What you need to consider
- Installing the 3160 in a basic layout
- Installing the 3160 in a stacked layout
- Attaching the 2110 amplifier adaptor panel to the rear of the transceiver cradle
- Attaching the 3160, voltage regulator and external speaker to a mounting surface
- Attaching a suitable power supply to the power supply cover
- Attaching the power amplifier mounting bracket to the transceiver cradle
- Attaching the 3160 and external speaker to the power amplifier mounting bracket
- Connecting the equipment
- Setting up the transceiver
- Grounding the 3160
- Installing the station
- 3 Specifications
- 4 Accessories
- Appendix A- Connectors
- Appendix B- Compliance
- Appendix C- Definitions
- Index
Power Amplifier 3160 Installation Handbook 43
Appendix A—Connectors
Figure 15: Front view of the 12-way connector on the
3160
Table 5: Pinouts for the 12-way connector on the 3160
Pin no. Function Input/output Signal level
A ALC Output 3.5 V = ALC control
B Fan (–) switched Output 0 V
C DC supply ground (–) Input 0 V
D Fan (+) Output 13.6 V nominal
EI
2
C clock Input 3.3 V data
FI
2
C data Input/output 3.3 V data
G DC supply positive (+) Input 13.6 V nominal
H Screen ground Input 0 V
J DC supply positive (+) Input 13.6 V nominal
K DC supply ground (–) Input 0 V
L DC supply ground (–) Input 0 V
M DC supply positive (+) Input 13.6 V nominal
A
B
C
DE
F
G
H
J
K
L
M