User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 Overview
- 2 Installing the 3160
- Disclaimer
- What you need to consider
- Installing the 3160 in a basic layout
- Installing the 3160 in a stacked layout
- Attaching the 2110 amplifier adaptor panel to the rear of the transceiver cradle
- Attaching the 3160, voltage regulator and external speaker to a mounting surface
- Attaching a suitable power supply to the power supply cover
- Attaching the power amplifier mounting bracket to the transceiver cradle
- Attaching the 3160 and external speaker to the power amplifier mounting bracket
- Connecting the equipment
- Setting up the transceiver
- Grounding the 3160
- Installing the station
- 3 Specifications
- 4 Accessories
- Appendix A- Connectors
- Appendix B- Compliance
- Appendix C- Definitions
- Index
Specifications
Power Amplifier 3160 Installation Handbook 39
Figure 14: Dimensions
Table 2: Dimensions
Item Size
Power amplifier 286 mm W × 146 mm D × 77 mm H
(11.3inW × 5.7inD × 3.0inH)
(includes allowance for connectors)
Power amplifier with fan 286 mm W × 146 mm D × 106 mm H
(11.3inW × 5.7inD × 4.1inH)
Transceiver in cradle with
interface adaptor and 2110
amplifier adaptor panel
307 mm W × 372 mm D × 112 mm H
(12.1inW × 14.6inD × 4.4inH)
(includes allowance for connectors)
Power supply cover 304 mm W × 282 mm D × 83 mm H
(12.0inW × 11.1inD × 3.3inH)
80 282
372
85 119 77
29
310
Side view
317
304
121
Rear view
All dimensions in mm