User's Manual

Installing the 3160
Power Amplifier 3160 Installation Handbook 27
Attaching a suitable power supply to the
power supply cover
The power supply cover is an optional item of equipment that
is supplied with its own fitting instructions. For information
on power supply options see page 6, Power supply options.
Please read Fitting Instruction 15-00147-001 for information
on installing this item correctly.
Attaching the power amplifier mounting
bracket to the transceiver cradle
To attach the mounting bracket to the cradle:
1 Position the power amplifier mounting bracket over the
top of the transceiver cradle (see Figure 10).
NOTE
If the mobile station is connected directly to a
12 V DC vehicle battery, the power supply
cover is not required.
CAUTION
The transceiver cradle must be attached to the
power supply cover or a suitable mounting
structure before attaching the power amplifier
mounting bracket. When the mounting bracket
is in place, the access holes for mounting the
transceiver cradle are covered. For more
information see the fitting instructions provided
with the cradle and power supply cover.
WARNING
All items must be mounted according to
relevant standards and approvals.