User's Manual

Installing the 3160
Power Amplifier 3160 Installation Handbook 23
Figure 8: Process for installing the 3160 in a stacked
layout
Attach the 2110 amplifier adaptor panel to
the transceiver cradle
Attach the transceiver cradle to the power supply
cover (if used), or an appropriate mounting surface
Insert the transceiver into the cradle,
then lock in place
Attach the 3160 and external speaker to the
power amplifier mounting bracket
Connect the 2110 amplifier adaptor panel, 3160, and
power supply together
Attach the 3020 or voltage regulator to
the power supply cover (if used)
Attach the power amplifier mounting bracket and
the interface adaptor to the transceiver cradle
Connect the interface adaptor to the transceiver
Connect the RF and control cables between the
transceiver, 3160, and antenna as required
Connect the external speaker to the interface adaptor
Ground the 3160
See the fitting instruction provided
with the power supply cover
(15-00147-001)
See page 24, Attaching the 2110
amplifier adaptor panel to the rear
of the transceiver cradle
See page 27, Attaching the power
amplifier mounting bracket to the
transceiver cradle
See page 31, Attaching the 3160
and external speaker to the power
amplifier mounting bracket
See page 33, Connecting the
equipment
See page 34, Grounding the 3160