User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 Overview
- 2 Installing the 3160
- Disclaimer
- What you need to consider
- Installing the 3160 in a basic layout
- Installing the 3160 in a stacked layout
- Attaching the 2110 amplifier adaptor panel to the rear of the transceiver cradle
- Attaching the 3160, voltage regulator and external speaker to a mounting surface
- Attaching a suitable power supply to the power supply cover
- Attaching the power amplifier mounting bracket to the transceiver cradle
- Attaching the 3160 and external speaker to the power amplifier mounting bracket
- Connecting the equipment
- Setting up the transceiver
- Grounding the 3160
- Installing the station
- 3 Specifications
- 4 Accessories
- Appendix A- Connectors
- Appendix B- Compliance
- Appendix C- Definitions
- Index
Overview
Power Amplifier 3160 Installation Handbook 13
Care and safety guidelines
The following guidelines are intended for best performance of
the equipment and operator safety:
• Ensure that the 3160 and manpack transceiver are in a
well-ventilated area.
• Check the mounting points regularly if the installation is
subject to continuous vibration.
• Ensure that the installation is grounded to a suitable earth
point.
• Check the safe working distance for the type of antenna
you are using at 125 W output.