User's Manual
Table Of Contents
- Table of contents
- List of figures
- List of tables
- Introduction
- 1 Overview
- 2 Installing the 3160
- Disclaimer
- What you need to consider
- Installing the 3160 in a basic layout
- Installing the 3160 in a stacked layout
- Attaching the 2110 amplifier adaptor panel to the rear of the transceiver cradle
- Attaching the 3160, voltage regulator and external speaker to a mounting surface
- Attaching a suitable power supply to the power supply cover
- Attaching the power amplifier mounting bracket to the transceiver cradle
- Attaching the 3160 and external speaker to the power amplifier mounting bracket
- Connecting the equipment
- Setting up the transceiver
- Grounding the 3160
- Installing the station
- 3 Specifications
- 4 Accessories
- Appendix A- Connectors
- Appendix B- Compliance
- Appendix C- Definitions
- Index
Overview
Power Amplifier 3160 Installation Handbook 11
Stacked layout
The stacked layout is shown in Figure 6. It includes:
• a 2110M or 2110 Manpack Transceiver
• a 3160 Power Amplifier
• a 2110 series Manpack Transceiver cradle with interface
adaptor and external speaker
• a 2110 amplifier adaptor panel
• a power adaptor cable
• a coaxial cable
• a suitable 12 V DC supply
• a power amplifier mounting bracket (includes long
screws for attaching the interface adaptor to the cradle)
• a power supply cover (includes transceiver supply
brackets and various captive nuts, screws and washers)
(optional)
CAUTION
Please read the installation process before
assembling the stacked layout (see Figure 8 on
page 23).