Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Inserting a 6110-MP into a
backpack
All Codan supplied backpacks come with an adjustable harness that holds the radio firmly in
position. The radio can be oriented so that the antenna port (J1) is located on either the right or
left side of the backpack.
accessory passthrough
elastic loops
radio harness
6110-MP radio
To insert the radio into the soft backpack:
1. Open the backpack to expose the harness.
2. Slide the radio into the harness with the front panel oriented to the top of the
backpack.
3. Secure the radio with the adjustable harness.
4. Position the elastic loops over the handles.
Inserting a 6110-MP into a backpack
Sentry-H 6110-MP Operator Guide Page 7