Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Making a 2G or 3G ALE call
Point-to-Point call
A point-to-point call is a general term used to describe a transmission between two radios. There
are several types of calls you can make using your radio. Refer to the call types (page 39) for more
information about the types of calls that are available.
navigation
indicator
call type
HF network
address
incoming
call
missed
call
outgoing
call
Stations/select HF Network/Async*
* ‘Async’ is for 3G ALE only
To start a 2G or 3G ALE call:
1. Press the key.
2. Select a call type using the and keys.
3. Enter the address of the station you are calling.
4. Press the key.
5. Enter a text message or select a menu item if prompted.
6. Press to begin the call.
Making a 2G or 3G ALE call
Sentry-H 6110-MP Operator Guide Page 43