Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Tuning a channel or frequency
Individual channels and frequencies can also be tested for their SWR value.
To tune a single channel or frequency:
1. Select the channel or frequency you want to test from the Channel or Scratch Mode
on the Operational screen (page 19).
2. Press the key.
3. Press the Push-To-Talk (PTT) button on the H-250 or 2320 handset (page 23).
4. Check the SWR value and address any problems before deployment.
Testing your radio before deployment
Sentry-H 6110-MP Operator Guide Page 13