User's Manual

OPERATING THE TRANSCEIVER
SETTING THE LOCATION OF THE DESK CONSOLE
72 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Figure 33: Connection between RFU and desk console using Ethernet
cables and optional switch
To set the location of the desk console:
 From the main menu, select (Settings), then (Control Point).
 Press or to select the Console tab.
 Press to move to the Console Location entry.
 Press or to select the value that you want to use from the following:
• If the desk console is connected to the transceiver using cable
08-07205-00x, select Local.
• If the desk console is connected to the transceiver using an Ethernet cable
(08-07215-001), select Remote.
 Press (Save) to save the information.
RF Unit
™
Type
2210
Seria
l No
.
antenna control
antenna
battery
RF unit
10-way
connector
15-way
connector
6-way
connector
Desk Console
™
desk console
RJ45
connector
Ethernet switch/
router/network
(optional)
08-07215-001
(10-way to RJ45)
12 V DC source
(78-16019)