User's Manual

OPERATING THE TRANSCEIVER
THE CHANNEL SCREEN
ENVOY™ TRANSCEIVER REFERENCE MANUAL 57
 Do any of the following:
• Hold OK to edit the channel, if permitted.
•PressOK to search for a channel.
•PressCALL to start a call.
• Hold CALL to go to Contacts.
Related links:
Finding a word or value on page 36
Selecting information to be shown in a status area
There are six status areas on the channel, scanning and free-tune screens that provide
operational information directly to the user.
Figure 29: Status areas
NOTE: Information in status areas 1 and 2 is replaced by the secure status when
a voice or data encryptor is used, respectively.
To select information to be shown in a status area:
 From the main menu, select (Settings), then (Control Point).
 Press or to select the Status Area tab.
 Press or to scroll to the status area in which you want to show status
information.
 Press or to select the status information that you want to show.
status area 1 status area 2
status area 3
status area 5 status area 6
status area 4