User's Manual

OPERATING THE TRANSCEIVER
THE CHANNEL SCREEN
56 ENVOY™ TRANSCEIVER REFERENCE MANUAL
When the transceiver is scanning, the channel screen is replaced by the scanning
screen.
Figure 28: Scanning screen
Related links:
Call types on page 400
Selecting information to be shown in a status area on page 57
Selecting a channel
To select a channel:
 Press PTT to exit to the channel or scanning screen.
 If the transceiver is scanning, press SCAN to switch off scanning.
 Press or to scroll to the channel that you want to use.
The channel is selected.
NOTE: If you want to change the sideband, press MODE. If the mode
does not change, there is only one mode for the channel.
NOTE: If you have an automatic antenna tuner fitted, press PTT to tune
the antenna to the currently selected channel.
scan indicator