User's Manual

SETTINGS
SETTINGS > CONNECTIVITY
240 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Settings > Connectivity
The connectivity settings enable you to modify the network connectivity settings for
non-standard Envoy™ installations.
Related links:
IP Address on page 240
Alias on page 240
Network Mask on page 241
DHCP Client on page 241
Default Gateway on page 241
USB IP Address on page 241
USB Network Mask on page 241
USB DHCP Server on page 241
RFU IP Address on page 242
RFU Alias on page 242
RFU Network Mask on page 242
RFU DHCP Client on page 242
RFU Default Gateway on page 242
IP Address
The IP Address entry sets the IPv4 address for the control point. If you have
multiple control points for an RFU, you must set a different IP address for each control
point, or enable the DHCP clients in the control point and RFU. If you have set the
DHCP Client entry to Enabled, this entry is ignored.
Default value: 192.168.0.249 (handset), 192.168.0.247 (desk console)
Related links:
DHCP Client on page 241
RFU DHCP Client on page 242
Alias
The Alias entry sets the network alias for this control point. If you have multiple
control points connected to an RFU, you can identify them with a meaningful name.
Default value: CP