Manualshelf

User's Manual

ManualsBrandsCodan ManualsElectronics2210 HF Radio System
241242243244245246247248249250
SETTINGS
SETTINGS > CALLING > ALE
E
NVOY™ TRANSCEIVER REFERENCE MANUAL 223
NOTE: If your HF network consists of only a few Codan HF transceivers with
the FED-STD-1045 ALE/CALM option installed and many other
transceivers, you may want to set the ALE Site Manager entry to
Disabled or Manual to reduce HF network traffic.
ALE Accept ALL Call
The ALE Accept ALL Call entry sets whether or not your transceiver accepts ALL
calls that it detects.
ALL calls are not addressed to a specific station. If your station detects a call with a
matching ALL address syntax, it enters the linked state and alerts the operator. If you
do not want to receive either global or selective ALL calls, disable this feature.
Default value: Enabled
Related links:
ALE address syntax on page 409
ALL call on page 409
Auto Your transceiver automatically initiates requests for site manager information from
unknown addresses with which it links.
Your transceiver broadcasts its self addresses automatically in response to requests
from other stations.
Your transceiver broadcasts its self addresses when it receives a Request Site Get
Status call from another station.
Your transceiver broadcasts its self addresses when you make a Broadcast Site Get
Status call.
Your transceiver requests site information from other stations when you make a
Request Site Get Status call.
Manual Your transceiver broadcasts its self addresses automatically in response to requests
from other stations.
Your transceiver broadcasts its self addresses when it receives a Request Site Get
Status call from another station.
Your transceiver broadcasts its self addresses when you make a Broadcast Site Get
Status call.
Your transceiver requests site information from other stations when you make a
Request Site Get Status call.
Restricted Your transceiver broadcasts its self addresses when you make a Broadcast Site Get
Status call.
Your transceiver requests site information from other stations when you make a
Request Site Get Status call.
Table 6: Values for the ALE Site Manager (cont.)
Value Description