User's Manual

SETTINGS

SETTINGS > CALLING > GENERAL

216 ENVOY™ TRANSCEIVER REFERENCE MANUAL

Alert Tones

The Alert Tones entry sets whether or not the transceiver gives an alert tone (beep,

or ring if an external alarm is connected) when it receives a message or a non-message

call.

If you want the transceiver to:

• provide a local alert tone and external alarm when it receives any type of call,

select Normal

• not provide a local alert tone or external alarm when it receives a message call,

select Messages do not ring

• not provide a local alert tone or external alarm when it receives any type of call,

select Disabled

Default value: Normal

Call Status Time

The Call Status Time entry sets the maximum length of time a called station has to

respond to a Get Status call with the information requested.

Range: 0 to 255 sec

Default value: 10 sec

Chain Call Pause

The Chain Call Pause entry sets the length of time the transceiver pauses between

chained calls.

A chain call is started when you hold the key for 2 sec. The transceiver makes the

first call defined in the emergency contact that you select, waits the pause time, then

makes the next call defined in the same emergency contact, and so on, until it makes

the last call defined for this emergency contact.

Range: 0 to 60 sec

Default value: 30 sec