User's Manual

SETTINGS
SETTINGS > CONNECTORS > RFU 6WAY
210 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Settings > Connectors > RFU 6way
The connector settings for the transceiver are set automatically according to the
requirements of the peripheral device connected.
Related links:
Peripherals on page 179
RFU 6way Speed
The RFU 6way Speed entry sets the data rate of the RS232 6-way serial port. If
available, you should set this to the same speed that is set in the connected peripheral
device.
Default value: 4800 bit/s