User's Manual

SETTINGS
SETTINGS > CONFIGURATION > GENERAL
202 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Settings > Configuration > General
The general configuration settings enable you to customise underlying operational
items that affect the behaviour of the particular transceiver that you are operating.
These include power levels, access, noise and detection sensitivities, and a number of
general timeouts.
Related links:
Admin PIN on page 202
Noise Limiter on page 202
Voice Detect Sensitivity on page 203
Power Down Timeout on page 203
Power Down Time on page 203
Easitalk Mode on page 203
RF Pre-amp on page 203
Tx Power on page 204
Low Power on page 204
Medium Power on page 204
High Power on page 204
Easitalk Start State on page 205
Default Selcall on page 205
Handset AGC on page 205
Handset PTT Beep on page 205
System Lock Override on page 206
Morse Timeout on page 206
PTT Timeout on page 206
Units on page 206
Abandon Mode on page 207
Command Line on page 207
Admin PIN
The Admin PIN entry stores a numeric password (up to 8 digits) for access to admin
level in the transceiver.
Default value: Empty
Noise Limiter
The Noise Limiter entry sets whether or not the noise limiter circuit is active.
The noise limiter reduces background impulse noise and ignition noise from cars.
Default value: Enabled