User's Manual

SETTINGS
SETTINGS > CONTROL POINT > CONSOLE
ENVOY™ TRANSCEIVER REFERENCE MANUAL 201
Settings > Control Point > Console
The console settings for a control point enable you to customise the behaviour of the
desk console that you are using as the control point.
Related links:
Console Location on page 201
Internal Speaker on page 201
Console PTT on page 201
Foot-switch PTT on page 201
Console Location
The Console Location entry sets whether the console is connected to the
transceiver directly or via the Ethernet.
If the transceiver is connected:
• directly to the console, select Local
• to the console remotely, select Remote
Default value: Local
NOTE: A remote installation requires a separate PSU for the console.
Related links:
Setting the location of the desk console on page 71
Internal Speaker
The Internal Speaker entry sets whether or not the internal speaker in the console
is active.
Default value: Enabled
Console PTT
The Console PTT entry sets the audio source for the PTT on the console to either an
internal or external microphone.
Default value: Internal microphone
Foot-switch PTT
The Foot-switch PTT entry sets the audio source for the foot-switched PTT on the
console to either an internal or external microphone.
Default value: Internal microphone