User's Manual

SETTINGS
SETTINGS > CONTROL POINT > TIME AND DATE
200 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Settings > Control Point > Time and Date
The time and date settings for a control point enable you to set the time zone offset
from UTC of the particular control point that you are operating, daylight saving
differences, and time and date formats.
Related links:
Time Zone on page 200
Daylight Saving on page 200
Clock Type on page 200
Time Format on page 200
Date Format on page 200
Setting the date and time on page 68
Time Zone
The Time Zone entry sets the difference between the local time and UTC.
Default value: (+9:30) Adelaide
Daylight Saving
The Daylight Saving entry sets the changes from UTC due to daylight saving.
Default value: Winter time
Clock Type
The Clock Type entry sets the type of clock that is shown on the Time and Date
screen to either analogue or digital.
Default value: Analogue
Time Format
The Time Format entry sets whether the transceiver uses a 12-hour or 24-hour
format.
Default value: 12 hour
Date Format
The Date Format entry sets the format in which the date is shown.
Available values: 1 Dec 2000, Dec 1, 2000, 1-12-2000, 12-1-2000, 1/12/2000,
12/1/2000
Default value: 1 Dec 2000