User's Manual

SETTINGS

SETTINGS > CONTROL POINT > GENERAL

196 ENVOY™ TRANSCEIVER REFERENCE MANUAL

Custom Brightness

The Custom Brightness entry sets the brightness of the LCD and keypad backlight

if Custom is selected in the Brightness entry.

Range: 5 to 100

Default value: 50

Related links:

Brightness on page 195

Auto Dim Time

The Auto Dim Time entry sets the time the transceiver waits after a key is pressed

before switching off the backlighting on the LCD and keypad of the control point. The

backlighting is automatically switched on again when a key is pressed.

Available values: 5, 10, 20 min

Default value: 10 min

Key Beeps

The Key Beeps entry sets whether or not a beep is heard when a key is pressed.

When you press a key that is appropriate for the task you are performing, the

transceiver makes a valid beep. When you press an inappropriate key, the transceiver

makes an error beep.

Default value: Enabled

Beeps and Tones

The Beeps and Tones entry sets whether or not beeps and tones are heard at the

transceiver for alerts and operational transitions.

If beeps and tones are switched off, the transceiver does not beep when it transitions

between certain modes, for example, entering and exiting secure mode.

Default value: Enabled

NOTE: Alert tones on receipt of a call are set in Settings > Calling >

General > Alert Tones.