User's Manual

SETTINGS
SETTINGS > CONTROL POINT > GENERAL
192 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Settings > Control Point > General
The general settings for a control point enable you to customise the behaviour of the
particular control point that you are operating.
Related links:
Welcome Image on page 192
Welcome Text on page 193
USB User Access on page 193
Channel Scroll on page 193
Show Channel Frequency on page 194
Frequency Format on page 194
Call Key Options on page 194
Night Display Brightness on page 194
Night Display Start on page 195
Night Display Stop on page 195
Local Welcome Text on page 195
Brightness on page 195
Custom Brightness on page 196
Auto Dim Time on page 196
Key Beeps on page 196
Beeps and Tones on page 196
Theme on page 196
Night Theme on page 197
Show Background Image on page 197
Logging on page 197
Logging Level on page 197
Welcome Image
The Welcome Image entry sets the image that is shown on the screen during power
up. The first image shown is the factory-set splashscreen, followed by the welcome
image, if loaded. The image is added into a profile in TPS, then you select the portion
of the image that you want to view at the control point in the preview window. You
can also fit the image to the screen. The profile is programmed to the transceiver.
Once a welcome image is loaded into the transceiver, it cannot be disabled via the
control point.
The Welcome Image may be .png or .jpg at a resolution of 320 × 240 pixels.
Default value: None