Manualshelf

User's Manual

ManualsBrandsCodan ManualsElectronics2210 HF Radio System
201202203204205206207208209210
PERIPHERALS
ENTRIES FOR A PERIPHERAL
ENVOY™ TRANSCEIVER REFERENCE MANUAL 189
RFU 6way Speed
The RFU 6way Speed entry sets the data rate of the RS232 6-way serial port. If
available, you should set this to the same speed that is set in the connected peripheral
device.
Default value: 4800 bit/s
RFU 6way Startup
The RFU 6way Startup entry sets the serial commands that you want to have
performed by the 6-way port following power up.
Typically, this is used for specific commands that are required in a system that uses
CICS commands.
Default value: Empty