User's Manual

NETS
ENTRIES FOR A NET
168 E
NVOY™ TRANSCEIVER REFERENCE MANUAL
NOTE: You can have the NET programmed in your transceiver, but you are
only a member of the NET if your self address is included in the NET
Members entry.
Out calls
The Out Calls entry enables you to set up your station to make calls to the NET, or
disable calling to the NET. Unless you need to restrict calling to the NET, you should
set the Out Calls entry to Enabled for all stations in the NET, regardless of their
member status.
If you want to set up your NET so that only one station makes calls to the NET, set
the Out Calls entry for the NET in that station to Enabled. Set the Out Calls entry
for all other stations with this NET programmed to Disabled.
In calls
CAUTION: If the Link entry is set to Only if response, you must ensure that at
least one member station is set to receive an incoming call from the
NET and send a response to the link request.
The In Calls entry enables you to set up your station to receive all incoming calls
from the NET, receive calls only if you are a member of the NET, or disable receiving
calls from the NET.
If your station:
• has the NET programmed and you want to receive calls from the NET, select
Enabled.
• has the NET programmed but you are not a member, and you do not want to
receive any of the NET calls, select Members only.
NOTE: As your station is not a member of the NET, it will not enter the
link.
• is a member of the NET but you do not want to receive any calls from the NET,
select Disabled.
Link
CAUTION: The method of linking must be the same for all members of the NET.
The Link entry determines how the calling station links with the called stations.
It can link:
• only if it receives a response from a member station
• even if it doesn’t receive a response from a member station
• immediately