User's Manual

CONTACTS
WORKING WITH CONTACTS
150 ENVOY™ TRANSCEIVER REFERENCE MANUAL
 Enter the name that you want to use for the contact, then press (Add Call).
The HF Network entry is highlighted.
The HF network defines the call system and self address that is used by your
station when the call is made. For example, if you want to select a channel for
the call, use a Selcall HF network. If you want the transceiver to automatically
select a channel for the call, use an ALE/CALM HF network.
 Press or to select the HF network that you want to use.
 Press to move to the Call Type entry.
 Press or to select the call type that you want to use.
NOTE: The call type that you select affects information that you can
enter for the remainder of this call.
 If you are adding:
• a Selective, Channel Test, Emergency, Get Position or Send Position call,
continue from Adding a simple call on page 151
• a Message call Adding a Message call on page 151
• a Phone call Adding a Phone call on page 153
• a Get Status call Adding a Get Status call on page 153
• an RFDS Emergency call Adding an RFDS Emergency call on page 154